A masterpiece in volume production.

The new KASTOwin


The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile.


The new sawing-generation with the unique cost-performance-ratio.


h

High Performance

The spindle-controlled sawing frame provides an essentially higher vibration damping than conventional cast constructions. In connection with the frequency-controlled infeed, the SmartControl provides a maximum of performance while running very quietly at the same time.

h

High quiet running

The high quiet running of the machine provides an extraordinary performance by similarly high tool life as well as a comfortable sound atmosphere in the machine environment.

h

Intelligent control system

All material data is stored in the control system. The adjustment of the necessary parameters is effected automatically. The "SmartControl" takes over responsibility for the right cut. KASTOrespond measures the power of the tools permanently and transfers them intelligently into optimal feed- and rapid feed movements. Extremely short rest pieces and precise material positioning save material and reducing the costs additionally.

h

Protection of tools and energy

In connection with the hydraulically pretensioned, integrated saw blade guides, called KASTOtrumguides, as well as with many further innovations, blade life up to 200.000 cm² is possible without any problems. Energy-saving by a high efficient, frequency-controlled drive and the compact hydraulic aggregate which is only running if required.

 

3.3 - KASTOwin A 3.3
Cutting range up to 330 mm

KASTOwin A 3.3

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

1908 / 571 590

SpecificationsKASTOwin A 3.3

Cutting range

Cutting range330 mm
Smallest dimension to be cut10 mm
Shortest length of residual piece, automatic operation60 mm
Shortest length of cut-off piece10 mm
Cutting range flat height x width330 x 350 mm

Mass and weights

Length1.360 mm
Width2.380 mm
Height1.850 mm
Total weight2.200 kg
Material support hight700 mm

Performance characteristics

Connected load6,0 kW
Saw motor, frequency controlled4,0 kW
Cutting speed infinitely variable12 - 150 m/min
Material feed length - individual feed500 mm
Multiple feed9.999 mm
Saw blade dimensions5.090 x 34 x 1,1 mm
Saw blade dimensions option I5.090 x 41 x 1,1 mm
Cutting feedelectrically adjustable via ball bearing spindle
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush, synchronised with main drive

Subject to technical changes

 

4.6 - KASTOwin A 4.6
Cutting range up to 460 mm

KASTOwin A 4.6

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

1908 / 571 590

SpecificationsKASTOwin A 4.6

Cutting range

Cutting range460 mm
Smallest dimension to be cut10 mm
Shortest length of residual piece, automatic operation35 mm
Shortest length of cut-off piece10 mm
Cutting range flat height x width460 x 460 mm

Mass and weights

Length1.650 mm
Width2.940 mm
Height2.030 mm
Total weight3.000 kg
Material support hight700 mm

Performance characteristics

Connected load6,0 kW
Saw motor, frequency controlled4,0 kW
Cutting speed infinitely variable12 - 150 m/min
Material feed length - individual feed500 mm
Multiple feed9.999 mm
Saw blade dimensions6.096 x 54 x 1,3 mm
Saw blade dimensions option I6.096 x 41 x 1,3 mm
Cutting feedelectrically adjustable via ball bearing spindle
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush,
 synchronised with main drive

Subject to technical changes

 

5.6 - KASTOwin A 5.6
Cutting range up to 560 mm

KASTOwin A 5.6

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

1908 / 571 590

SpecificationsKASTOwin A 5.6

Cutting range

Cutting range560 mm
Smallest dimension to be cut10 mm
Shortest length of residual piece, automatic operation35 mm
Shortest length of cut-off piece10 mm
Cutting range flat height x width560 x 560 mm

Mass and weights

Length1.650 mm
Width3.340 mm
Height2.280 mm
Total weight3.800 kg
Material support hight700 mm

Performance characteristics

Connected load8,0 kW
Saw motor, frequency controlled5,5 kW
Cutting speed infinitely variable12 - 150 m/min
Material feed length - individual feed500 mm
Multiple feed9.999 mm
Saw blade dimensions7.067 x 54 x 1,6 mm
Saw blade dimensions option I7.067 x 54 x 1,3 mm
Cutting feedelectrically adjustable via ball bearing spindle
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush, synchronised with main drive

Subject to technical changes

 

8.6 - KASTOwin A 8.6
Cutting range up to 860 mm

KASTOwin A 8.6

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

1908 / 571 590

SpecificationsKASTOwin A 8.6

Cutting range

Cutting range860 mm
Smallest dimension to be cut35 x 35 mm
Shortest length of residual piece, automatic operation35 mm
Shortest length of cut-off piece10 mm
Cutting range flat height x width860 x 860 mm

Mass and weights

Length2.870 mm
Width4.340 mm
Height3.200 mm
Total weight10.000 kg
Material support hight700 mm

Cutting range

Connected load10,0 kW
Saw motor, frequency controlled5,5 kW
Cutting speed infinitely variable12 - 90 m/min
Material feed length - individual feed500 mm
Multiple feed9.999 mm
Saw blade dimensions9.394 x 67 x 1,6 mm
Saw blade dimensions option I9.394 x 80 x 1,6 mm
Cutting feedelectrically adjustable via 2 ball bearing spindles
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush,
 synchronised with main drive

Subject to technical changes

 

10.6 - KASTOwin A 10.6
Cutting range up to 1060 mm

KASTOwin A 10.6

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

1908 / 571 590

SpecificationsKASTOwin A 10.6

Cutting range

Cutting range1.060 mm
Smallest dimension to be cut50 x 50 mm
Shortest length of residual piece, automatic operation35 mm
Shortest length of cut-off piece10 mm
Cutting range flat height x width1.060 x 1.060 mm

Mass and weights

Length2.870 mm
Width4.790 mm
Height3.600 mm
Total weight11.500 kg
Material support hight700 mm

Performance characteristics

connected load12,0 kW
Saw motor, frequency controlled7,5 kW
Cutting speed infinitely variable12 - 90 m/min
Material feed length - individual feed500 mm
Multiple feed9.999 mm
Saw blade dimensions10.422 x 80 x 1,6 mm
Saw blade dimensions option I10.422 x 67 x 1,6 mm
Cutting feedelectrically adjustable via ball bearing spindle
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush, synchronised with main drive

Subject to technical changes

 

Please get in contact with us.

KASTO Hotline Great Britain

1908 / 571 590

KASTO Hotline Germany

+49 7841 61-100

 


Your contact person

Your contact person

Your contact person

We will answer your questions and advise you.

Absendenm