A masterpiece in volume production.

The new KASTOwin


The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile.


The new sawing-generation with the unique cost-performance-ratio.


h

High Performance

The spindle-controlled sawing frame provides an essentially higher vibration damping than conventional cast constructions. In connection with the frequency-controlled infeed, the SmartControl provides a maximum of performance while running very quietly at the same time.

h

High quiet running

The high quiet running of the machine provides an extraordinary performance by similarly high tool life as well as a comfortable sound atmosphere in the machine environment.

h

Intelligent control system

All material data is stored in the control system. The adjustment of the necessary parameters is effected automatically. The "SmartControl" takes over responsibility for the right cut. KASTOrespond measures the power of the tools permanently and transfers them intelligently into optimal feed- and rapid feed movements. Extremely short rest pieces and precise material positioning save material and reducing the costs additionally.

h

Protection of tools and energy

In connection with the hydraulically pretensioned, integrated saw blade guides, called KASTOtrumguides, as well as with many further innovations, blade life up to 200.000 cm² is possible without any problems. Energy-saving by a high efficient, frequency-controlled drive and the compact hydraulic aggregate which is only running if required.

 

3.3 - KASTOwin A 3.3
Cutting range up to 12.99 in

KASTOwin A 3.3

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

724 325-5600

SpecificationsKASTOwin A 3.3

Cutting range

Cutting range12.99 in
Smallest dimension to be cut0.39 in
Shortest length of residual piece, automatic operation2.36 in
Shortest length of cut-off piece0.39 in
Cutting range flat height x width12.99 x 13.78 in

Mass and weights

Length53.54 in
Width93.70 in
Height72.83 in
Total weight4850 lbs
Material support hight27.56 in

Performance characteristics

Connected load8.04 HP
Saw motor, frequency controlled5.36 HP
Cutting speed infinitely variable39.37 - 492.13 ft/min
Material feed length - individual feed19.69 in
Multiple feed393.66 in
Saw blade dimensions16’8” x 1 3/8” x .042”
Saw blade dimensions option I16’8” x 1 5/8” x .050”
Cutting feedelectrically adjustable via ball bearing spindle
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush, synchronised with main drive

Subject to technical changes

 

4.6 - KASTOwin A 4.6
Cutting range up to 18.11 in

KASTOwin A 4.6

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

724 325-5600

SpecificationsKASTOwin A 4.6

Cutting range

Cutting range18.11 in
Smallest dimension to be cut0.39 in
Shortest length of residual piece, automatic operation1.38 in
Shortest length of cut-off piece0.39 in
Cutting range flat height x width18.11 x 18.11 in

Mass and weights

Length64.96 in
Width115.75 in
Height79.92 in
Total weight6600 lbs
Material support hight27.56 in

Performance characteristics

Connected load8.04 HP
Saw motor, frequency controlled5.36 HP
Cutting speed infinitely variable39.37 - 492.13 ft/min
Material feed length - individual feed19.69 in
Multiple feed393.66 in
Saw blade dimensions20’ x 2-1/8” x 0.42 in
Saw blade dimensions option I20’ x 1-5/8” x 0.50 in
Cutting feedelectrically adjustable via ball bearing spindle
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush,
 synchronised with main drive

Subject to technical changes

 

5.6 - KASTOwin A 5.6
Cutting range up to 22.05 in

KASTOwin A 5.6

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

724 325-5600

SpecificationsKASTOwin A 5.6

Cutting range

Cutting range22.05 in
Smallest dimension to be cut0.39 in
Shortest length of residual piece, automatic operation1.38 in
Shortest length of cut-off piece0.39 in
Cutting range flat height x width22.05 x 22.05 in

Mass and weights

Length64.96 in
Width131.50 in
Height89.76 in
Total weight8,378 lbs
Material support hight27.56 in

Performance characteristics

Connected load10.72 HP
Saw motor, frequency controlled7.37 HP
Cutting speed infinitely variable39.37 - 492.13 ft/min
Material feed length - individual feed19.69 in
Multiple feed393.66 in
Saw blade dimensions277.95 x 2.13 x 0.63 in
Saw blade dimensions option I277.95 x 2.13 x 0.50 in
Cutting feedelectrically adjustable via ball bearing spindle
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush, synchronised with main drive

Subject to technical changes

 

8.6 - KASTOwin A 8.6
Cutting range up to 33.76 in

KASTOwin A 8.6

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

724 325-5600

SpecificationsKASTOwin A 8.6

Cutting range

Cutting range33.76 in
Smallest dimension to be cut1.38 x 1.38 in
Shortest length of residual piece, automatic operation1.38 in
Shortest length of cut-off piece0.39 in
Cutting range flat height x width33.76 x 33.76 in

Mass and weights

Length112.99 in
Width170.87 in
Height125.98 in
Total weight22,046 lbs
Material support hight27.56 in

Cutting range

Connected load13.40 HP
Saw motor, frequency controlled7.37 HP
Cutting speed infinitely variable39.37 - 295.28 ft/min
Material feed length - individual feed19.69 in
Multiple feed393.66 in
Saw blade dimensions369.84 x 2.64 x 0.63 in
Saw blade dimensions option I369.84 x 3.15 x 0.63 in
Cutting feedelectrically adjustable via 2 ball bearing spindles
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush,
 synchronised with main drive

Subject to technical changes

 

10.6 - KASTOwin A 10.6
Cutting range up to 41.73 in

KASTOwin A 10.6

The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency

Download brochure (PDF 3.0 MiB)

Hotline Vertrieb

724 325-5600

SpecificationsKASTOwin A 10.6

Cutting range

Cutting range41.73 in
Smallest dimension to be cut1.97 x 1.97 in
Shortest length of residual piece, automatic operation1.38 in
Shortest length of cut-off piece0.39 in
Cutting range flat height x width41.73 x 41.73 in

Mass and weights

Length112.99 in
Width188.58 in
Height141.73 in
Total weight25,353 lbs
Material support hight27.56 in

Performance characteristics

connected load16.08 HP
Saw motor, frequency controlled10.05 HP
Cutting speed infinitely variable39.37 - 295.28 ft/min
Material feed length - individual feed19.69 in
Multiple feed393.66 in
Saw blade dimensions410.31 x 3.15 x 0.63”
Saw blade dimensions option I410.31 x 2.64 x 0.63”
Cutting feedelectrically adjustable via ball bearing spindle
Material feedball bearing spindle
Material clampinghydraulic
Saw blade cleaningby easy to exchange wire brush, synchronised with main drive

Subject to technical changes

 

Please get in contact with us.

KASTO Hotline USA

724 325-5600

KASTO Hotline Germany

+49 7841 61-100

 


Absendenm