A masterpiece in volume production.
The new KASTOwin.
The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile.
The new sawing-generation with the unique cost-performance-ratio.
High Performance
The spindle-controlled sawing frame provides an essentially higher vibration damping than conventional cast constructions. In connection with the frequency-controlled infeed, the SmartControl provides a maximum of performance while running very quietly at the same time.
High quiet running
The high quiet running of the machine provides an extraordinary performance by similarly high tool life as well as a comfortable sound atmosphere in the machine environment.
Intelligent control system
All material data is stored in the control system. The adjustment of the necessary parameters is effected automatically. The "SmartControl" takes over responsibility for the right cut. KASTOrespond measures the power of the tools permanently and transfers them intelligently into optimal feed- and rapid feed movements. Extremely short rest pieces and precise material positioning save material and reducing the costs additionally.
Protection of tools and energy
In connection with the hydraulically pretensioned, integrated saw blade guides, called KASTOtrumguides, as well as with many further innovations, blade life up to 200.000 cm² is possible without any problems. Energy-saving by a high efficient, frequency-controlled drive and the compact hydraulic aggregate which is only running if required.
KASTOwin A 3.3
The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.
- Customised to the specific application using a modular system design
- Quick motion using servo drive and ball screw spindle for the material feed and the linear guided saw frame
- Automatic band guide arm adjustment
- Quick and easy programming via colour touch screen
- SmartControl to ensure high bandsaw blade lifetimes
- Incremental feed for cutting batches of short pieces
| Cutting range | |
|---|---|
Cutting range | 13 in.
|
Smallest dimension to be cut | 0.4 in.
|
Shortest length of residual piece, automatic operation | 2.4 in.
|
Shortest length of cut-off piece | 0.4 in.
|
Cutting range flat height x width | 13 in. x 14 in. |
| Mass and weights | |
|---|---|
Length | 53.5 in.
|
Width | 93.7 in.
|
Height | 72.83 in.
|
Total weight | 4519 lbs.
|
Material support hight | 27.6 in. |
| Performance characteristics | |
|---|---|
Connected load | 8.04 hp
|
Saw motor, frequency controlled | 5.36 hp
|
Cutting speed infinitely variable | 472 - 5905 in./min
|
Material feed length - individual feed | 19.69 in.
|
Multiple feed | 393.66 in.
|
Saw blade dimensions | 200.39 in. x 1.34 in. x 0.04 in
|
Cutting feed | electrically adjustable via ball bearing spindle
|
Material feed | ball bearing spindle
|
Material clamping | hydraulic
|
Saw blade cleaning | by easy to exchange wire brush, synchronised with main drive |
KASTOwin A 4.6
The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.
- Customised to the specific application using a modular system design
- Quick motion using servo drive and ball screw spindle for the material feed and the linear guided saw frame
- Automatic band guide arm adjustment
- Quick and easy programming via colour touch screen
- SmartControl to ensure high bandsaw blade lifetimes
- Incremental feed for cutting batches of short pieces
| Cutting range | |
|---|---|
Cutting range | 18.11 in
|
Smallest dimension to be cut | 0.39 in
|
Shortest length of residual piece, automatic operation | 1.38 in
|
Shortest length of cut-off piece | 0.39 in
|
Cutting range flat height x width | 18.11 x 18.11 in |
| Mass and weights | |
|---|---|
Length | 64.96 in
|
Width | 115.75 in
|
Height | 79.92 in
|
Total weight | 6600 lbs
|
Material support hight | 27.56 in |
| Performance characteristics | |
|---|---|
Connected load | 8.04 HP
|
Saw motor, frequency controlled | 5.36 HP
|
Cutting speed infinitely variable | 39.37 - 492.13 ft/min
|
Material feed length - individual feed | 19.69 in
|
Multiple feed | 393.66 in
|
Saw blade dimensions | 20’ x 2-1/8” x 0.42 in
|
Cutting feed | electrically adjustable via ball bearing spindle
|
Material feed | ball bearing spindle
|
Material clamping | hydraulic
|
Saw blade cleaning | by easy to exchange wire brush, synchronised with main drive
|
KASTOwin A 5.6
The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.
- Customised to the specific application using a modular system design
- Quick motion using servo drive and ball screw spindle for the material feed and the linear guided saw frame
- Automatic band guide arm adjustment
- Quick and easy programming via colour touch screen
- SmartControl to ensure high bandsaw blade lifetimes
- Incremental feed for cutting batches of short pieces
| Cutting range | |
|---|---|
Cutting range | 22.05 in |
Smallest dimension to be cut | 0.39 in |
Shortest length of residual piece, automatic operation | 1.38 in |
Shortest length of cut-off piece | 0.39 in |
Cutting range flat height x width | 22.05 x 22.05 in |
| Mass and weights | |
|---|---|
Length | 64.96 in |
Width | 131.50 in |
Height | 89.76 in |
Total weight | 8,378 lbs |
Material support hight | 27.56 in |
| Performance characteristics | |
|---|---|
Connected load | 10.72 HP |
Saw motor, frequency controlled | 7.37 HP |
Cutting speed infinitely variable | 39.37 - 492.13 ft/min |
Material feed length - individual feed | 19.69 in |
Multiple feed | 393.66 in |
Saw blade dimensions | 277.95 x 2.13 x 0.63 in |
Cutting feed | electrically adjustable via ball bearing spindle |
Material feed | ball bearing spindle |
Material clamping | hydraulic |
Saw blade cleaning | by easy to exchange wire brush, synchronised with main drive |
KASTOwin A 10.6
The new, fully-automated bandsaws from the KASTOwin range have been designed for mass production sawing of solid material, tube and profile. Designed in Germany and manufactured in state-of-the-art, flow line production lines at our assembly plants in Achern (in the northern Black Forest) and Schalkau (Thuringia), KASTOwin creates the ideal conditions for optimum efficiency.
- Customised to the specific application using a modular system design
- Quick motion using servo drive and ball screw spindle for the material feed and the linear guided saw frame
- Automatic band guide arm adjustment
- Quick and easy programming via colour touch screen
- SmartControl to ensure high bandsaw blade lifetimes
- Incremental feed for cutting batches of short pieces
| Cutting range | |
|---|---|
Cutting range | 41.73 in |
Smallest dimension to be cut | 1.97 x 1.97 in |
Shortest length of residual piece, automatic operation | 1.38 in |
Shortest length of cut-off piece | 0.39 in |
Cutting range flat height x width | 41.73 x 41.73 in |
| Mass and weights | |
|---|---|
Length | 112.99 in |
Width | 188.58 in |
Height | 141.73 in |
Total weight | 25,353 lbs |
Material support hight | 27.56 in |
| Performance characteristics | |
|---|---|
connected load | 16.08 HP |
Saw motor, frequency controlled | 10.05 HP |
Cutting speed infinitely variable | 39.37 - 295.28 ft/min |
Material feed length - individual feed | 19.69 in |
Multiple feed | 393.66 in |
Saw blade dimensions | 410.31 x 3.15 x 0.63” |
Cutting feed | electrically adjustable via ball bearing spindle |
Material feed | ball bearing spindle |
Material clamping | hydraulic |
Saw blade cleaning | by easy to exchange wire brush, synchronised with main drive |